[13C,15N]-Copper cyanide - Names and Identifiers
[13C,15N]-Copper cyanide - Physico-chemical Properties
Molecular Formula | CCuN
|
Molar Mass | 91.58 |
Density | 2.985 g/mL at 25 °C |
Melting Point | 454 °C (lit.) |
Storage Condition | 2-8°C |
[13C,15N]-Copper cyanide - Risk and Safety
Risk Codes | R26/27/28 - Very toxic by inhalation, in contact with skin and if swallowed.
R32 - Contact with acids liberates very toxic gas
R37/38 - Irritating to respiratory system and skin.
R41 - Risk of serious damage to eyes
R50/53 - Very toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
|
Safety Description | S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S28 - After contact with skin, wash immediately with plenty of soap-suds.
S36/37/39 - Wear suitable protective clothing, gloves and eye/face protection.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S61 - Avoid release to the environment. Refer to special instructions / safety data sheets.
S60 - This material and its container must be disposed of as hazardous waste.
S29 - Do not empty into drains.
S7 - Keep container tightly closed.
|
UN IDs | UN 1587 6.1/PG 2 |
WGK Germany | 3 |
[13C,15N]-Copper cyanide - Introduction
COPPER(I) CYANIDE-13C,15N is a COPPER(I) compound rich in the 13C and 15N isotopes. The following is a description of its nature, use, preparation and safety information:
Nature:
- COPPER(I) CYANIDE-13C, the chemical formula of 15N is CuCN.
-It is a colorless crystal with a strong cyanide smell.
-Its melting point is about 388 ° C.
- COPPER(I) CYANIDE-13C, the solubility of 15N is low, and it is almost insoluble in water.
Use:
- COPPER(I) CYANIDE-13C,15N is used as a catalyst in many organic synthesis reactions.
-It can replace the regular copper cyanide (I) in the cyanidation reaction of organic chemistry, so that the product contains 13C and 15N isotopes, this is useful for tracing reaction pathways or labeling organic molecules.
Method:
- COPPER(I) CYANIDE-13C,15N can be prepared by reacting 13C and 15N isotopically labeled sodium cyanide with COPPER(I) salt.
Safety Information:
- COPPER(I) CYANIDE-13C,15N is a toxic substance and is highly toxic.
-It is harmful to the environment and toxic to aquatic organisms.
-During operation, protective gloves and eye protection should be worn to avoid direct contact with skin and eyes.
-When storing and handling, it should be separated from other toxic chemicals, and properly marked and packaged.
-waste COPPER(I) CYANIDE-13C,15N should comply with local regulations, strictly control and treat the release of waste.
Last Update:2024-04-10 22:29:15